Please fill all fields marked with *
- Conforms to Virucidal Effectiveness European Standard EN 14476*
- Kills 99.99% of most harmful bacteria, fungi and viruses
- TGA Approved for COVID-19 claim (ARTG No.336973)
- Ready to use 2-in-1 solution, eliminating the need for pre‑clean process
- Non-flammable and non-toxic formulation
- Suitable for all transport, commercial, industrial, health services, military and any essential services industry
- Can be applied by spray, or by microdiffusion with an Ultra Low Volume (ULV) fogging machine
- Available in 500ml, 5L, 20L, 200L and 1000L pack sizes
Ki-ose 370 is a ready to use 2-in-1 high performance disinfectant cleaner for all hard surfaces. It provides broad spectrum disinfection in industrial, institutional, healthcare and household settings. Kills SARS-CoV-2 (COVID-19 virus) in dirty conditions (no need to pre-clean). For aircraft, it is effective for use in galleys, on trolleys, passenger seats and tablets, luggage compartments, all surfaces in lavatories and in the cabin.
Ki-ose 370 will not harm or damage fabrics, plastic, metals, rubber or other surfaces. It has been tested against the relevant aviation material standards. It is compliant with the requirements of the Airbus Consumable Materials list and conforms to European Norms EN Standards. Hard surface disinfectant only. Do not mix with detergents or other chemicals. Not to be used on skin. Not to be used on medical devices or other therapeutic goods.
TGA Approved for COVID-19 claim (ARTG No.336973)
Complies with AMS 1453, Airbus CML, Boeing D6-7127
Conforms to all European Norms EN Standards
SPRAY: Spray Ki-ose 370 onto the surface until completely wet. Allow up to 10 minutes contact time for disinfection. Wipe the surface with a clean dry lint free cloth. Do not rinse. For heavily soiled surfaces, a second application may be required. For food contact surfaces, rinse and dry afterwards. Store below 30⁰C. Hard surface disinfectant only. Not to be used on skin. Use biocides with caution. Read the label before use. Not to be used to disinfect medical devices or other therapeutic goods.
LIQUID/WIPE: Apply Ki-ose 370 liquid onto the wipe material until wet. Wipe and leave for up to 10 minutes to ensure complete disinfection. Wipe the surface with a clean dry lint-free cloth. It is recommended to also rinse and dry if the surfaces are in contact with food.
FOG: All fog treatments must be carried out in empty premises / areas with any air conditioning and recirculation systems switch off. Ensure all external doors are closed and any internal doors and any internal doors and small space closures are open. Positioning of static fogging equipment or movement of portable fogging equipment must be carried out to achieve a minimum dosage rate of 8mL/m3. The target particle size can range between 10µm - 50µm however for optimal performance we recommend a range between 10µm - 30µm with fogging application.
BACTERICIDAL: EN 1276, EN 1040, EN 13623, NF T72-301
FUNGICIDAL: EN 1275
VIRUCIDAL: EN 14476
MYCOBACTERICIDAL: NF T72-151
|9185/25/AU||Ki-ose 370||500ml||Australia only|
|9185/42/AU||Ki-ose 370||5L||Australia only|
|9185/51/AU||Ki-ose 370||20L||Australia only|
|9185/64/AU||Ki-ose 370||200L||Australia only|
|9185/1000/AU||Ki-ose 370||1000L||Australia only|