Products

Non Destructive Testing » Cleaners & Removers


DR-60 Cleaner-Remover

Description Penetrant System Category Competitor Equivalent Download TDS
DR-60 Cleaner-Remover is used in the penetrant process to remove excess, nonwater-washable penetrants from part surfaces, e.g., Sherwin DP-40 Dye Penetrant (visible red) and Sherwin RC-65 and RC-77 Flourescent Penetrants. It is a manual "wipe on" and "wipe off" material and, consequently, recommended for small areas. DR-60 may also be used for generally cleaning oily, dirty surfaces. DR-60 is especially suitable for cleaning prior to the application of inspection penetrants. Solvent Removers (Method C) Ardrox PR-1
Magnaflux SKC-S
Download TDS

DR-62 Cleaner-Remover

Description Penetrant System Category Competitor Equivalent Download TDS
DR-62 Cleaner-Remover is used in the penetrant process to remove excess, nonwater-washable penetrants from part surfaces, e.g., Sherwin DP-40 Dye Penetrant (visible red) and Sherwin RC-65 and RC-77 Flourescent Penetrants. It is a manual "wipe on" and "wipe off" material and, consequently, recommended for small areas. DR-62 may also be used for generally cleaning oily, dirty surfaces. DR-60 is especially suitable for cleaning prior to the application of inspection penetrants. DR-62 is widely found in machine shops, foundries, and overhaul shops; it is a good, all puropse cleaner. Solvent Removers (Method C) Ardrox 9PR5
Magnaflux 1,2,3
Download TDS

DUBL-CHEK DR-64

Description Properties Packaging Product Codes Downloads
DUBL-CHEK DR-64 Cleaner / Remover can be used in the solvent remove penetrant process and to remove CP-2 white contrast paint from part surfaces. Colour: Colourless Liquid
Volatility: 100%
Odour: low petroleum smell
Temperature limit: 4°C to 50°C
Aerosol - 1505/400
(12 aerosols/carton)
3.8L - 1505/42
18.9L - 1505/51
208L - 1505/64
Download TDS Dubl-Check DR-64 TDS

Download TDS Dubl-Check DR-64 MSDS

Download TDS Dubl-Check DR-64 Aerosol MSDS

LA-1 Clear-Cleaner

Description Penetrant System Category Competitor Equivalent Download TDS
LA-1 was formulated specifically for cleaning prior to penetrant inspection. It is a penetrant compatible cleaner. It replaces chlorinated solvent vapor degreasing as the first stage in the production penetrant inspection process. LA-1 may be used on all metals - ferrous and nonferrous - including aluminum, magnesium, high nickel, and titanium alloys. It removes light shop oils such as cutting oils, forming oils, light rust preventatives, and organic soils acquired during processing. It also removes grit and chips when used as a pressure-spray or as an agitated-immersion. It does not remove inorganic soils such as corrosion products. N/A None known Download TDS

ER-83A Hydrophilic Emulsifier

Description Penetrant System Category Competitor Equivalent Download TDS
ER-83A is a concentrated "detergent" used diluted with water to emulsify Sherwin's fluorescent penetrants, such as the Sherwin "RC-" designated products. ER-83A removes surface, non-water-washable penetrants by spray or immersion following a pre-wash step. The product meets low-sulfur, low-halogen, and low-sodium requirements, has a flash point over 200F, and is an OSHA Class IIIB material. Method D (Hydrophilic emulsifer) Ardrox ZR-10B
Magnaflux 9PR12, 9881
Download TDS

ER-85 Lypophilic Emulsifier

Description Penetrant System Category Competitor Equivalent Download TDS
ER-85 is used in the inspection penetrant process to remove excess surface penetrant where the Method B, the lipophilic emulsifier method, is required. There is no "pre-wash" with this method, and the emulsifier is used full strength. Method B Ardrox ZE-4B
Magnaflux 9PR3
Download TDS